Jade MK latex tutorial (Patreon)

Here is my Jade tutorial:

Started off drafting my pattern

Leotard front and back, Stocking and arm band. I cut all these into sections and colour coded them.

Stockings:

I added 1" gold running strip along the middle and top, I find it easier to glue while the stockings are flat.

Gently place the green diamond on top.

Only one seam centred on the back.

 Arm band: cut into sections, this gave a nice layered effect!

Cross detail panel on the back, I used 0.40mm trans latex and glued 1cm strips on top.

Mask I made up a pattern too, Split into half which I do this to all my patterns. So it's all symmetrical! Added two 1cm latex strips on each end just like a mask.

For the Leotard I installed a 51cm zip, I use this length with all my leotards.

Glued front to back first, then joined the side seams, finally gluing the crotch together.

For the chains, I added a loop inside and hooked a jump ring so the chains can be attached. This can also be removed at any time!

For the chest crosses I glued strips which are attached inside, shown in the photo below:

Here's a photo of me gluing her upper arm band.

The sash is separate, believe it or not!

I hope you enjoyed my little tutorial how I made Jade, any questions? feel free to ask!

I have some more tutorials to share in June :)