ケツデカジェネちゃんアクスタ化への道　Gene with a big ass, the way to make it into an acrylic stand. (Patreon)

限定記事用に表紙のケツを突き出したジェネちゃんを作っていたのですが、これをアクリルスタンドにしたらぶっかけ放題だなとふと思い立ち、実現に向けて色々動いていました。

まずは初のアクスタ製作なので発注先を調べます。

BOOTHを利用しているのでそこでよく見かけるpixivファクトリー製はどうだろうと見てみたんですが、こちらは最大サイズが16cmまでとなっていました。デカケツの迫力とぶっかけ甲斐を考慮すると30cm前後は必要だなと思っていたためNG。

他のサイトも色々探してみたのですが、30cmというサイズがネックとなりほとんどNGという中でサイズ問題をクリアできる発注先をようやく見つけました。それでもアクリルの部材の問題でケツ幅28cmになりましたけど許容範囲内なのでOKをかけて現在製作してもらっているところです。

29日出荷ということなので、届いたらまた報告します。

うまく行けば受注とって同人グッズとしてBOOTHで頒布できる…かも。

I made Gene-chan with her ass sticking out of the cover, and it occurred to me that if I made an acrylic stand of her, I could BUKKAKE her as much as I wanted, so I was working on a number of things to make it happen.

First of all, since this was the first time for me to produce an acrylic stand, I looked up the place to place an order.

Since I use BOOTH, I looked at pixiv factory, which I often see on BOOTH, but I found that their maximum size is 16cm. I thought I would need a size of around 30cm to make my big ass look powerful and worthwhile.

I tried to find other sites, but the size of 30cm was a bottleneck and almost all of them were not available. I finally found a company that was able to clear the size problem, and although the width of the ass was 28 cm due to a problem with the acrylic material, it was within the acceptable range, so I gave them the OK and they are now manufacturing it.

It will be shipped on the 29th, so I will report back when it arrives.

If all goes well, I may be able to take orders and distribute them on BOOTH as doujin goods....