Home
Artists
Search Recent Random
Posts
Search DMs Popular Hash Lookup Tags Random
Importer
Import FAQ
Register
Partychan Matrix ThePornDude
Home Artists Posts Import Register

The Abishai are complete! (Patreon)

Published:
2019-04-19 14:30:20
Edited:
2019-04-19 14:30:55
Imported:
Tags:

Downloads

Content

Here are all the Abishai from Mordenkainen's Tome of Foes now printed and painted! I'm really happy with the paint jobs on each :-D  You can find the full files in the MTOF folder under Devils and in the links below

My take on the Abishai is unofficial Fan Content permitted under the Fan Content Policy. Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the Coast LLC.

Black -  https://www.shapeways.com/product/5TUFH4Z6F/black-abishai

Blue -  https://www.shapeways.com/product/J7HPZDSG7/blue-abishai

Green Abishai -  https://www.shapeways.com/product/Y32JSREWA/green-abishai

White -  https://www.shapeways.com/product/SG5TU8M66/white-abishai

Red -  https://www.shapeways.com/product/RZ6SXLV4A/red-abishai

Files

Comments

Eskil Wendel
>>22006691

It's a bit later, but thank you for the removing swords tip. They're the bane of FDM! Adventurers are much harder than monsters, as it turns out, høhø

Anonymous

What kind of supports do you used while printing these?

mz4250
>>21918801

These were in resin so thin supports while they were tilted back 45 degrees.

Anonymous
>>21918801

How do you remove the pockmarks left from supports? I'm new to resin and try to used as few supports as possible.

mz4250
>>21918801

I carefully snip them off and use a jeweler sanding stick for areas that look messed up. Some I just deal with cuz it adds texture though.

Anonymous
>>21918801

I'm still using the photon printers free software. Any recommendations on an upgrade? if

Anonymous
>>21918801

I've started using Chitubox for my resin printer. It's been a great experience so far, the supports are much better than the software that came with my printer. I believe it has an inbuilt profile for the Anycubic Photon. <a href="https://www.chitubox.com" rel="nofollow noopener" target="_blank">https://www.chitubox.com</a>

Anonymous

Love them!

Anonymous

Any tips for printing on my Ender 3? I've had the Black Abishai fail on me 3x already.

mz4250 (edited)

Comment edits

2021-11-07 23:05:13 This is a challenge for an FDM. I recommend removing the swords in Blender and just printing the body after exporting it as its own stl. Then print the swords seperately and just squeeze them into his hands. Your support game needs to be strong for this, so printing as is should work, but printing him on his back will work too. Use the tips Danny has in this video on support tweaking too: <a href="https://www.youtube.com/watch?v=QaE7YPvh4E8&amp;feature=youtu.be&amp;fbclid=IwAR3NFASoh7MLpv_GTzKZzLywa1Hziqyk7PwgOmQ03uwH5-TvotsyFLLsCgQ" rel="nofollow noopener" target="_blank">https://www.youtube.com/watch?v=QaE7YPvh4E8&amp;feature=youtu.be&amp;fbclid=IwAR3NFASoh7MLpv_GTzKZzLywa1Hziqyk7PwgOmQ03uwH5-TvotsyFLLsCgQ</a>
2019-04-22 18:10:36 This is a challenge for an FDM. I recommend removing the swords in Blender and just printing the body after exporting it as its own stl. Then print the swords seperately and just squeeze them into his hands. Your support game needs to be strong for this, so printing as is should work, but printing him on his back will work too. Use the tips Danny has in this video on support tweaking too: <a href="https://www.youtube.com/watch?v=QaE7YPvh4E8&feature=youtu.be&fbclid=IwAR3NFASoh7MLpv_GTzKZzLywa1Hziqyk7PwgOmQ03uwH5-TvotsyFLLsCgQ" rel="nofollow noopener" target="_blank">https://www.youtube.com/watch?v=QaE7YPvh4E8&feature=youtu.be&fbclid=IwAR3NFASoh7MLpv_GTzKZzLywa1Hziqyk7PwgOmQ03uwH5-TvotsyFLLsCgQ</a>
>>22006691

This is a challenge for an FDM. I recommend removing the swords in Blender and just printing the body after exporting it as its own stl. Then print the swords seperately and just squeeze them into his hands. Your support game needs to be strong for this, so printing as is should work, but printing him on his back will work too. Use the tips Danny has in this video on support tweaking too: <a href="https://www.youtube.com/watch?v=QaE7YPvh4E8&feature=youtu.be&fbclid=IwAR3NFASoh7MLpv_GTzKZzLywa1Hziqyk7PwgOmQ03uwH5-TvotsyFLLsCgQ" rel="nofollow noopener" target="_blank">https://www.youtube.com/watch?v=QaE7YPvh4E8&feature=youtu.be&fbclid=IwAR3NFASoh7MLpv_GTzKZzLywa1Hziqyk7PwgOmQ03uwH5-TvotsyFLLsCgQ</a>

Anonymous
>>22006691

4th times a charm lol <a href="https://i.imgur.com/AFcEl4E.jpg" rel="nofollow noopener" target="_blank">https://i.imgur.com/AFcEl4E.jpg</a>

Anonymous
>>22006691

I printed him at 150% upright and fully intact. I used a slightly tweaked Siepie profile with line supports, roof, floor, raft.