3D bricks (Patreon)

My friends, thank you so much for all the nice messages you left me after the last post. Here are some 3D printable bricks I designed some time ago. They all come pre-supported and in convenient "packages". I did some test printing and they came out perfectly! They are all measured in real life and scaled down to 1/35 scale.

The most "worthy" type is the large hollow brick which is quite common and offers a lot of visual detail. The elongated bricks are also pretty unique, and I'm including some real-life pictures to give you a better idea about their look. Of course, all of these can (and should be) textured with putty, and once painted, they'll absolutely pop!

I'm also including basic bricks. I thought this idea was ridiculous, but they're actually pretty easy to work with! You can add chips and cracks with a hobby blade, and add more texture with putty. So if you fancy a pile of bricks in your diorama, or you want to build an entire wall/building from 3D printed bricks, go ahead! I'm tempted to try it myself.

PS: the best approach is to print these, wash them in alcohol, then dunk them in hot water and break them off the supports, and only then cure them with UV light. The support removal is much easier on uncured prints.

You'll find them in the Google folder below. Standard bricks are named Brick Pack, and all the other bricks are named Porotherm :)

https://drive.google.com/drive/u/1/folders/1Qz8uvCPM9AihsbJxO_t19NvahY4SEPAn